Consultation hotline：400-021-6779
2020 官網(wǎng)升級中!現(xiàn)在您訪問官網(wǎng)的瀏覽器設備分辨率寬度低于1280px請使用高分辨率寬度訪問。
1. Draw electrical drawings of new products, electric control cabinet layout and line routing design;
2. Be responsible for the supervision and inspection of the installation progress and quality of the electrical aspects of the product;
3. Be responsible for technical support of product electrical installation;
4. Be responsible for completing other tasks arranged by leaders.
1. Bachelor degree or above, major in electrical engineering, automation, electronic information, mechanical design and automation;
2. At least 3 years working experience in the same position;
3. Strong on-site coordination and processing ability, proficient in relevant professional specifications, and professional drawing review ability;
4. Familiar with relevant electrical design software;
5. Have project management ability, innovation ability, good appearance design and aesthetic ability;
6. Have the ability to analyze the structural strength, integrity, reliability, material standardization, processability and safety of products;
7. Be proactive, conscientious and responsible, have strong executive ability, and have a strong team spirit;
1. Have experience in using multimeter related instruments, and understand the knowledge of analog circuit, digital circuit and single chip microcomputer;
2. Be familiar with basic computer operation, and be proficient in word and excel operation;
3. Have good communication and coordination skills, strong hands-on ability and learning ability.
Major in electronics, with more than 1 year working experience in electronics related industry;
1. Be responsible for the sales and promotion of the company's products, and complete the Department's sales indicators according to the marketing plan.
2. Explore new markets, develop new customers, and increase the scope of product sales.
3. Be responsible for the collection of market information and the analysis of competitors.
1. Be responsible for the collection of market information and the analysis of competitors.
2. College degree or above, with knowledge of relevant electronic and power products, good customer service awareness, and a sense of responsibility,
3. Be able to work under great pressure, have teamwork spirit, and be good at challenges
1. Be responsible for the schematic design of low-voltage motor controller control board / drive board, layout guidance design, hardware block diagram design, simulation and testing, and complete relevant design documents.
2. Decompose the hardware requirements according to the customer's needs, design the hardware scheme of the control unit, and complete the selection of electronic components.
3. Support the preparation of EE, EMC and DV test specifications and complete relevant tests.
4. Compile controller DFMEA, fmeda, BOM, special characteristics and other related work.
5. Support product problem troubleshooting, chip failure analysis and problem solution countermeasures.
6. Support the production support of control samples.
7. Provide technical support to customers and respond in time.
1. Major in power electronics, bachelor degree or above.
2. Be familiar with automotive industry standards, be familiar with the development process of automotive electronic products, and have at least 2 years of low-voltage motor controller design experience.
3. Be proficient in using common schematic tool software, circuit simulation software, power supply, oscilloscope and other test equipment.
4. Be familiar with analog circuits and digital circuits, and be familiar with the electrical characteristics of common electronic components (passive devices, discrete devices, drive chips, MOSFETs, etc.) and use them flexibly.
5. Have good team communication skills, have the spirit of innovation, dare to challenge, have the consciousness of active communication, treat work steadily, seriously, carefully, and have a cheerful personality.
1. Major in Applied Electronics, proficient in STM32F Series MCU programming.
2. Master modbus, can protocol, Lin protocol and 485 protocol
3. Be able to understand the circuit schematic diagram;
4. Conduct system joint commissioning with hardware engineers, analyze and eliminate product faults, and cooperate with the whole machine for joint commissioning;
5. Design the software of relevant test equipment or testing equipment according to the product development and production requirements;
6. Formulate product related technical documents according to the development requirements
1. Obey other tasks arranged by leaders
2. Be rigorous, don't procrastinate, work carefully, have standardized documents, have teamwork spirit, and be hardworking
1. Based on STM32, ARM hardware platform software C language programming, debugging and optimization;
2. Develop Windows applications based on vs (Visual Studio) platform;
3. Prepare relevant design and development documents of project products;
4. Prepare project documents according to project requirements, and be able to independently develop relevant processes of the project;
5. Keep good communication with the project team and provide necessary support for the work of the project team.
1. Have the ability to independently develop product design, be familiar with circuit principle, and be able to understand circuit schematic diagram;
2. Be familiar with the principle of single chip microcomputer and STM32 series embedded development;
3. Proficient in C language program development, with good coding style and software architecture design ability;
4. Be familiar with UART, I2C, SPI, USB, can and other common interface buses, and be familiar with tcp/ip communication principle;
5. Be familiar with VS platform and windows application development;
6. At least one year of STM32 project development experience, windows application development experience is preferred.
1. Be responsible for equipment power on commissioning, parameter measurement, function verification, and basic power consumption knowledge.
2. Common tools: multimeter, digital bridge, voltmeter, oscilloscope, various probes.
3. Those who have experience in electronic equipment debugging or can use multimeter, oscilloscope is preferred.
1. Have a certain basic electrical foundation of strong and weak current, and be able to install electrical components according to equipment requirements
2. At least 1 year of relevant working experience in assembling equipment and internal inspection, commissioning and trial operation of equipment;
Official wechat
Sales Hotline：400-021-6779
Switchboard：021-67727150
3255 Shengang Road, Songjiang Industrial Zone, Shanghai
2F, building 11
Silicon valley power, No. 416, Xuegang North Road, Longhua District, Shenzhen
2nd floor, building A4, Qinghu Park
No. 3, Rongjing East Street, Yizhuang Economic Development Zone, Beijing
Room a1821, Lido, Rongjing
Multifunctional Immunity Tester
Automotive ESD Generator
Radio Frequency Electromagnetic Field Radiation Immunity System
Impulse Voltage Generator
Anechoic Chamber
EMC Antenna
